What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Benjamin Moore Eco Spec Interior Latex Flat 219
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaPurpose of product.
Usage: Low VOC Interior Flat Latex PaintStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 2024101 Paragon Drive
Montvale NJ 07645
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Kieselguhr 061790-53-2 5 No Titanium dioxide 013463-67-7 25 Yes 
CoC List
Silica, amorphous (Diatomaceous silica) 007631-86-9 5 No Calcium carbonate 000471-34-1 15 No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :May 05, 2006 Date when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
MSDS Verified :November 27, 2007 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING1 0 0 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : 0
-
Warnings
Use only with adequate ventilation. Do not breathe spray mist or sanding dust. Avoid contact with eyes and prolonged or repeated contact with skin. Wear eye protection and gloves during application or sanding. A dust/particulate respirator approved by NIOSH should be worn when sanding or spraying. Close container after each use.
IN CASE OF SPILL: Absorb with inert material and dispose of as specified under -
Acute health effects
From MSDS
PRIMARY ROUTE(S) OF ENTRY: DERMAL INHALATION INGESTION
EFFECTS OF OVEREXPOSURE:
Inhalation - Causes nose and throat irritation.
Inhalation - Causes lung irritation.
Skin and Eye Contact - Primary irritation.
Contact - Causes skin irritation.
Ingestion of large amounts could cause serious injury.
MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: None expected when used in accordance with Safe Handling and Use Information. -
Chronic health effects
From MSDS
Skin Contact - Prolonged or repeated exposure may cause dermatitis. Chronic lung conditions may be aggravated by exposure to high dust levels. -
Carcinogenicity
This product contains no reported or suspected carcinogens -
Handling information
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Do not throw or drop containers.
OTHER PRECAUTIONS : Avoid contact with eyes and prolonged contact with skin or breathing of spray mist or sanding dust. Close container after each use. Keep out of reach of children. Do not take internally. -
Disposal information
Conventional procedures in compliance with local, state and federal regulations. Do not incinerate sealed containers. -
California Prop. 65 Warning
This product may contain small amounts of materials known to the State of California to cause cancer and reproductive harm. -
First Aid
Inhalation - Remove to fresh air. Get medical help for any breathing difficulty.
Eye Contact - Flush thoroughly with water. Call physician.
Skin Contact - Wash with soap and water.
Ingestion - Drink 1 or 2 glasses of water to dilute. DO NOT induce vomiting. Call physician.
-
UN Global Harmonization Classification